Overview
Formulated to protect walls from scuff marks from items like shoes and bags, Dulux Trade Scuffshield Matt is a tough, water-based white Matt emulsion paint containing ultimate scuff resistant technology. Ideal for high traffic areas such as corridors, hallways, stairwells and busy commercial settings. It is cleanable and offers good stain resistance.
- Scrub (Type C* BS7719) & Stain Resistant. *May exclude some extra deep base colours
- Cleanable matt finish
- For high traffic areas and commercial spaces
Area | Interior |
Recommended Use | Interior walls and ceilings, particularly in areas of high traffic |
Base | Water-Based |
Coverage | Up to 16m² per litre |
Drying Time | Dependant on temperature and humidity |
Re-Coat Time | 4-6 Hours |
Recommended Coats | 2 Coats |
Application Method | Brush, Roller, Conventional Spray |
VOC Levels | Low |
Clean Up | Remove as much paint as possible from the equipment before cleaning with water |
Preparation
For best results with Dulux Trade Scuffshield Matt, make sure surfaces to be painted are sound, clean and dry. New surfaces in particular must be fully dry.
- Remove all loose and defective paint. Special precautions should be taken during surface prep of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
- Wash the surface to remove dirt, grease and powdery or dusty residues. Rinse with clean water and allow to dry.
- Seal surfaces that remain powdery after thorough preparation with an appropriate plaster sealer such as .
- Where necessary, rub down and then wipe off with a damp, lint free cloth to avoid dust.
Application
We always recommend to perform a test patch on a small area of the surface to be painted to ensure you are happy with the finished results.
- Stir thoroughly before use.
- Can be applied using a brush, roller or sprayer.
- Seal new or bare surfaces with a first coat of Dulux Trade Vinyl Matt thinned with up to 1 part clean water to 5 parts paint.
- The normal finishing process is 2 coats of Dulux Trade Scuffshield Matt, significant colour changes may require additional coats.